Shed City Pty Ltd have available High Quality Steel Roof and Wall Cladding in a variety of styles and fashion colours. The appealing High Strength Profiles can be adapted to suit a variety of applications, giving you design versatility and a Quality finish to your project.
5 Rib Profile
5 Rib is an attractive Angular Ribbed High Strength Steel Sheeting Profile with an anti-capillary groove in the side rib. This versatile sheet can be adapted for roof, wall or fence projects.
Colours - Zinc and a large range of Colours are available for selection.
Coverage - Standard 762mm.
Roof Pitch - Minimum recommended is 2 degrees
Lengths - Shed City Pty Ltd can roll lengths to suit your needs.
From 100mm up to 9000mm (30’) (long lengths are subject to suitable handling and transport needs being met.)
Accessories -
- Tec screws in various sizes both plain and coloured are available,
- Rivets, and
- a variety of ready made Flashings as well as design specific flashings are available,
- Touch Up Paint in a variety of matching colours are available.
For advise on specific accessories please call us.
Tolerances - Length ± 10mm Width ± 4mm
Specifications & Span – Available Spans Shown are based on Non Cyclonic Areas,
Terrain Category 3, Maximum Internal pressure coefficient +0.2
| Application |
Tensile Strength (MPa) |
Coating Grade | BMT | TCT | Single Span | End Span | Internal Span | Unstiffened Eave Overhang |
| Roofing | 550 | AZ150 | .42 | .47 | 1000 | 1350 | 1700 | 150 |
| Walling | 550 | AZ150 | .42 | .47 | 1800 | 1800 | 2200 | 150 |
| Walling | 550 | AZ150 | .35 | .39 | 1200 | 1500 | 1800 | 150 |
BMT = Base Metal Thickness TCT = Total Coated Thickness
Kg Per Lineal Metre: Zinc .42 = 3.26 kg .35 = 2.74 kg Colour .42 = 3.32 kg .35 = 2.80 kg
For Wind levels exceeding Terrain Category 3 and for Cyclonic Areas required spans will need to be calculated based on local wind design factors.
Fixing Recommendations for Non Cyclonic Areas –
Sheets should be laid in the opposite direction to prevailing weather.
Roof Application requires Crest fixing only with 1 fixing required per Crest
Tec Screws Class 3 12-14 x 45mm with neoprene washer.
Wall Application requires Pan Fixing only with 1 fixing required per pan
Tec Screws Class 3 10-16x16mm with or without neoprene washer.
Further information regarding installation refer to “Steel Sheet Installation” leaflet.