Shed City Pty Ltd have available High Quality Steel Roof and Wall Cladding in a variety of styles and fashionable colours.  The appealing High Strength Profiles can be adapted to suit a variety of applications, giving you design versatility and a Quality finish to your project.

 

Custom Orb Corrugated Iron

 

Custom Orb Corrugated Iron is an extremely popular High Strength Steel Sheeting Profile.  This versatile sheet can be adapted for roof, wall or fence projects.

 

Colours - Zinc and a large range of Colours are available for selection.

 

Coverage -  Standard 762mm.

 

Roof Pitch - Minimum recommended is 5 degrees (1 in 12).

 

Lengths -  Shed City Pty Ltd can roll lengths to suit your needs. 

From 100mm up to 9000mm (30’) (long lengths are subject to suitable handling and transport needs being met.)

 

Accessories -  Tec screws in various sizes both plain and coloured are available, Rivets, and a variety of ready made Flashings as well as design specific flashings are available,

Touch Up Paint in a variety of matching colours are available.

For advise on specific accessories please call us on 1300 799 636 or email sales@shedcity.com.au

 

Tolerances -    Length ± 10mm          Width ± 4mm

 

Specifications & Span –         Available Spans Shown are based on Non Cyclonic Areas,

Terrain Category 3, Maximum Internal pressure coefficient +0.2

 

Application

Tensile Strength

(MPa)

Coating Grade

BMT

TCT

Single Span

End Span

Internal Span

Unstiffened Eave Overhang

Roofing

550

AZ150

.42

.47

700

900

1200

200

Walling

550

AZ150

.42

.47

1200

1350

1800

200

Walling

550

AZ150

.35

.39

1000

1200

1600

200

 

BMT = Base Metal Thickness    TCT = Total Coated Thickness

Kg Per Lineal Metre:  Zinc    .42 = 3.26 kg   .35 = 2.74 kg    Colour .42 = 3.32 kg .35 = 2.80 kg

 

For Wind levels exceeding Terrain Category 3 and for Cyclonic Areas required spans will need to be calculated based on local wind design factors.

 

Fixing Recommendations for Non Cyclonic Areas –

Sheets should be laid in the opposite direction to prevailing weather.

Roof Application        requires Crest fixing only 3 or 5 (depending on conditions)

Tec Screws Class 3 12-14 x 35mm with neoprene washer.

Wall Application        requires Pan Fixing only 3 or 5 (depending on conditions)

Tec Screws Class 3 10-16x16mm with or without neoprene washer.

 

Further information regarding installation refer to “Steel Sheet Installation” leaflet.